User manual

84
level
PVSIMulation
PV Simulation subsystem
:CURVe
[:NUMber] <NR1>
Set the curve number n to write the
parameters to
:PARAMeter <NRf, NRf,
NRf, NRf
| ?>
Set or return the parameters (Isc,
Voc, Imp and Vmp) of the curve
number n
:SELEct <NR1 | ?>
Set or return the selected curve to be
running
:POWer <NRf | ?>
Set or return the simulated output
power from 0 ~ 100%
[:STATe] <Bool | ?>
Set or return the PV simulation
function state.
:TABLe
[:NUMber] <NR1>
Set the point number n of the user
defined V/I table
:PARAMeter <NRf,NRf | ?>
Set or return the parameters (voltage
and current) of the table point
number n
:START
Start the user defined V/I table
loading
:STATe?
Return the previous write status of
table point, 0=not OK, 1=OK
:STOP
Stop the user defined V/I table
loading
[SOURce]
Source subsystem
:CURRent
[:LEVel] <NRf | ?>
Set or return output current level
:PROTection
[:STATe] <Bool | ?>
Set or return over-current protection