User Manual

66
When it is running, a clock on the display counts down until it reaches
zero and the output will turn OFF. An * indicator on the display will flash
to indicate the timer is running. When the timer is running, the
following screen will be displayed:
To activate the timer function, follow the steps below:
1. Press the and buttons to enter the timer setup screen.
The following will be displayed:
2. Use the buttons to move the cursor to the desired
parameter (hour, minute, and second) and use the keypad to
change the parameter values.
3. Use the buttons to move the cursor to the ON/OFF
parameter and use the rotary knob to change ON or OFF.
4. Press to complete the timer setting.
5. Pressing the key will enable the output and start the timer.
3.10 Slew Rate Setting