User Manual

85
level
PVSIMulation
PV Simulation subsystem
:CURVe
[:NUMber] <NR1>
Set the curve number n to write the
parameters to
:PARAMeter <NRf, NRf,
NRf, NRf
| ?>
Set or return the parameters
(Regulation type, Vmp, Pmp and
Material Type) of the curve number n
Regulation type:
1 = EN50530
2 = SANDIA
3 = NBT32004
Material Type:
EN50530 – 1 = cSi ; 2 = TF
SANDIA – 1 = TF ; 2 = SCMC ; 3 = HEC
NBT32005 – 1 = cSi ; 2 = TF
Example (SANDIA, HEC, 1000 Vmp,
2000 Pmp):
PVSIM:CURV:PARAM 1,1000,2000,3
:SELEct <NR1 | ?>
Set or return the selected curve to be
running
:POWer <NRf | ?>
Set or return the simulated output
power from 0 ~ 100%
[:STATe] <Bool | ?>
Set or return the PV simulation
function state.
:CONTrol:MODe <CC|CV|?>
Set or return the control operation
mode for PV simulation.
[SOURce]
Source subsystem
:CURRent
[:LEVel] <NRf | ?>
Set or return output current level
:PROTection
[:STATe] <Bool | ?>
Set or return over-current protection