User Manual

3. Use keys to select between each settings and press to configure the
corresponding setting.
4. To change any of the parameter settings, use the rotary dial.
5. Press to save each setting and the display will return to the
LAN menu.
6. The following lists the options that can be changed for each setting:
Mode: DHCP, MANUAL
IP Addr: 000.000.000.000
Subnet: 000.000.000.000
Gateway: 000.000.000.000
DNS: 000.000.000.000
4.1.8 Web server
There is an embedded web server GUI that can access the power supply via LAN interface using
a web browser. The GUI provides a simple way of setting voltage and current, as well as
monitoring the output, using a web browser from a computer connected to the same local area
network as the power supply. To access this, do the following:
1. Connect the power supply to the same network as the PC.
2. Open a web browser on the computer to control the power supply.
3. Check the IP address of the power supply through INFO in the MENU.
4. Type the IP address of the power supply in the URL bar of your browser with http:// prefix (i.e.
http://192.168.1.55 for IP Address 192.168.1.55).
5. If correctly configured, the screen will be shown Home page, and enter the Lan Config page,
Config page, and Control page turn into Web Server Login Page, the following screen will be
shown: