User Manual

3.1.1 How to Access the Menu
Before using the instrument, it is important to be familiarized with its menu structure and learn
how to view or change settings and parameters. Follow the steps below to guide you in selecting
menu options.
1 From the normal display, press to enter the menu.
2 The selected item will be show. Use keys to move through the menu selections.
3 When the desired menu section is show, press to access its menu settings. Below is
the display when SYSTEM is selected.
4 The selected item will be show. Use the keys tomove through the menu items.
When there is a on the right side of the display, that means there are more menu items
available to select from. Similarly, a will appear on the left side of the display when there
are menu items to the left. Use the keys accordingly to select the desired menu
item.
5 Press to access the selected menu item.
6 There may be parameters or options to select within each menu item. Follow the same
instructions as described in the previous steps to select them. To save changes to a setting,
press .
7 To exit the menu at any time, press until the normal.
3.2 Configure Voltage/Current Output
Voltage and current can be set from the front panel. Remote sense is also available on the rear panel
for voltage compensation at the output.
3.2.1 Setting Voltage
Follow the steps below to set the output voltage:
1. From the normal front panel display, users can use either the voltage adjust knob or the numeric
keypad to enter the setting voltage.