Datasheet

High Voltage Multi-Range DC Power Supplies
MR Series
4
www.bkprecision.com
Remote control and programming
PC software is provided for front panel emulation, generating and executing test sequences, or logging measurement data without the need to write source code.
n Log voltage, current, and power values as well
as time stamp, CV/CC, and output status.
n Save and load list files to/from the power
supply’s internal memory.
n Create an unlimited number of external list
files to be executed from PC memory. Save and
recall list files to/from the PC.
Application software and integration
Using a 5 ½ digit multimeter, voltage and current
parameters can be conveniently calibrated from
the front panel via the calibration menu.
Convenient front panel guided
calibration
The MR Series provides a built-in web server that
allows users to configure, control, and monitor
the basic settings of the power supply, using a
web browser on a computer connected to the
same local area network.
Web server interface
The power supply can be configured for Socket
or Telnet connections through the LAN (Ethernet)
and controlled using SCPI commands.
Socket and Telnet interface
Slew rate setting allows users to control the
voltage and current slope (rise and fall times).
The timer-controlled output can be set from
1 second to 255 hours.
Adjustable slew rate and output timer
The galvanically isolated analog interface can be
used to monitor voltage, current, regulation mode
(CV or CC), or to indicate fault conditions. In
addition to front panel and PC interface control,
the MR Series can be controlled from zero to full
scale by an external voltage signal or resistor
(0 to 5 V / 5 kΩ or 0 to 10 V / 10 kΩ selectable).
Analog programming and monitoring
DMM
DC Current Measurement
DC OUTPUT