User Manual

When program mode is running. The current program (1-0 : 1), step (1-0 : 0) and repeat number
(0/3 : 3 ) will also show on the display.
Where p is the program number, step (1-0 : 0) is the step number, repeat number (0/3 : 0 ) is the
present repeated number and repeat number (0/3 : 3 ) is the total repeat number. For example, if
the repeat number is 1/3, this means that there are three repeats of this program and it is now
running the first repeat.
3.13 Timer Function
The timer function is a countdown clock, which allows the user to setup how long the output will
be enabled when it is initially turned ON.
When it is running, a clock on the display counts down until it reaches zero and the output will turn
OFF. When the timer is running, the following screen will be displayed:
To activate the timer function, follow the steps below:
1. Press the and buttons to enter the timer setup screen. The following will be
displayed:
2. Use the buttons to move the cursor to the desired parameter (hour, minute, and
second) and use the keypad to change the parameter values.
3. Use the buttons to move the cursor to the ON/OFF parameter and use the rotary
knob to change ON or OFF.
4. Press to complete the timer setting.
5. Pressing the key will enable the output and start the timer.