User Manual

Users also have the ability to utilize the REPEAT and NEXT options. The REPEAT option allows
the user to execute the same program as many times, continuously, as needed. The NEXT option
allows the user to select the next program to execute once the current program ends. Please be
aware that REPEAT and NEXT options are part of a program, so if one program’s NEXT option is
pointed to a previous program, the power supply will cycle these programs infinitely.
Configure
An example of a program is illustrated below:
Figure 3.13 – Program Sequence Example
Follow the steps below to set up a program.
1. Press the button to enter the program function settings. The following will be displayed:
2. Use the rotary knob to select the setting of OFF or ON.
3. Use the buttons to move the cursor to the PROGRAM selection and use the rotary
knob to select a program between 1-10.
4. Use the buttons to move the cursor to the EDIT selection and press . The following
screen will be displayed:
5. Press , a t this point, the user may select how many times they wish the current program to
repeat in the REPEAT field, by using the keypad or the rotary knob.