User Manual

2. Use the keypad to enter the memory location you want to recall. Enter a value between 1 and 10.
The voltage and current settings of that memory location will be shown on the bottom of the
display.
3. Once entered, the saved settings at the location will be immediately recalled.
Note: When in Recall mode, users can recall settings from different locations
without having to press additional keys each time. For example, you can press 1
to recall settings in location one, and then press 5 to immediately recall settings
in location 5.
3.12 Program Function
The MR has a Program feature that allows storing of programs into internal non-volatile memory
and recalling and running them per configured parameters. A total of 100 steps can be configured
for each program, and a total of 10 programs are available for storage. Additionally, multiple
programs or all 10 programs can be saved into a program configuration, where each program
configuration allows running one program after another or repeat a finite number of times. This
allows for a total of 900 steps in one configuration. Below is an illustration of how programs are
structured, stored, and recalled.
Figure 3.12 – Program Structure Illustration
3.12.1 Configure Program Parameters
3.12.1.1 Options