Owner manual

[:LEVel]

:RANGe <NRf> Set constant current range. MAX Y

:RANGe? Query constant current range. Y

:SLEW Y

[:BOTH] <NRf>

Set both positive and negative slew rate for

current

MAX Y

:POSitive <NRf> Set positive slew rate for current MAX Y

:POSitive? Query positive slew rate for current Y

:NEGative <NRf> Set negative slew rate for current Y

:NEGative? Query negative slew rate for current Y

:PROTection

[:STATe] <b> Disable or enable current protection ON

[:STATe]? Query current protection state

:LEVel <NRf> Set current protection level MAX

:LEVel? Query current protection level

:DELay <NRf> Set current protection delay time 3

:DELay? Query current protection delay time

:TRANsient

:MODE <name>

Set current transiton mode (CONTinuous,

PULSe, or TOGGle)

CONTinuous

:MODE?

Query current transition mode

:ALEVel <NRf> Set current transition level A MAX

:ALEVel? Query current transition level A

:AWIDth <NRf> Set current transition width A 500uS

:AWIDth? Query current transiton width A

:BLEVel <NRf> Set current transition level B MIN

:BLEVel?

Query current transition level B

:BWIDth <NRf> Set current transition width B 500uS

:BWIDth? Query current transiton width B

:HIGH <NRf> Set the voltage specification of upper limit