Owner manual

3.4 SCPI Command Tree

TRACe Command Summary

Commands Description Default

Channel

Specific

:TRACe

:CLEar Clear readings from buffer. Y

:FREE? Query points available and points in use. Y

:POINts <n> Specify size of buffer (2 to 1024). 2 Y

:POINts? Query buffer size. Y

:FEED <name>

Select source of readings (VOLTage, CURRent,

TWO).

TWO Y

:CONTrol <name> Select buffer control mode (NEVer or NEXT). NEVer Y

:CONTrol? Query buffer control mode. Y

:FEED? Query source of readings for buffer. Y

:FILTer

[:STATe] Select the type of buffer data OFF

[:STATe]? Query the type of buffer data

:DELay <n> Set the trigger delay time 0

:DELay? Query the trigger delay time

:TIMer <n> Set the timer interval 1

:TIMer? Query the timer interval

:DATA? Read all data in the buffer.

CHANnel Command Summary

Commands Description Default

Channel

Specific

:CHANnel <n> Select the electronic load channel. 1

:CHANel:ID?

This query reads the model numbers of the

modules installed in the mainframe.