Owner manual

settings are adjusted as follows.

If existing settings are within new range, no adjustment is made.

If existing settings are outside new range, the levels are set to either the maximum or minimum value

of the new range, depending on which they are closest to.

Command Syntax

[SOURce:]RESistance:RANGe <NRf+>

Parameters

0 to max. rated resistance

Unit

Ω (ohms)

Examples

RES:RANG 15 SOUR:RES:RANGE 20

Query Syntax

[SOURce:]RESistance:RANGe?

Returned Parameters

<NR3>

Related Commands

RES RES:SLEW