Owner manual

41
Parameters
None
Examples
STAT:CHAN:EVEN?
Returned Parameters
<NR1> (register value)
Related Commands
*CLS
STATus:CHANnel:CONDition?
Channel Specific
This query returns the value of the Channel Condition register. The particular channel must first be
selected by the CHAN command.
Query Syntax
STATus:CHANnel:CONDition?
Parameters
None
Examples
STAT:CHAN:COND?
Returned Parameters
<NR1> (register value)
Related Commands
STAT:CHAN?
STATus:CHANnel:ENABle
Channel Specific
This command sets or reads the value of the Channel Enable register for a specific channel. The
particular channel must first be selected by the CHAN command.
Command Syntax
STATus:CHANnel:ENABle <NR1>
Parameters
0 to 65535
Examples
STAT:CHAN:ENAB 3
Query Syntax
STATus:CHANnel:ENABle?
Returned Parameters
<NR1> (register value)
Related Commands
*CLS
STATus:CSUM?
This query returns the value of the Channel Event summary register. The bits in this register
correspond to a summary of the channel register for each input channel. Reading the Channel Event
summary register clears it. This command is not channel specific and applies to the entire mainframe.
Query Syntax
STATus:CSUMmary[:EVENt]?
Parameters
None