User Manual

32
9 System Settings
9.1 System Setup
The System Setup page is used to set Date, Time, Brightness and Beep.
Figure 30 - System Setup
Press the arrow keys (▲ ▼) to move the cursor to the wanted configuration. Press the
ENTER key to change its value and then press the ENTER key again to confirm the
changes.
Configurations
Range
Description
Date
YY/MM/DD
Set the date (year/month/day)
Time
HH:MM:SS
Set the time (hour/minute/seconds)
Brightness
0 to 9
The level of the LCD brightness
Beep
ON or OFF
Enable/disable the buzzer
Table 13 - System Setup Configurations