User Manual

8
Figure 6 - Display Description
The instrument provides 3 display screen options for accessing commonly used measurements
and settings. Each of these screens can be selected by pressing the Display x of x softkey
repeatedly.
Figure 7 - Display 1 of 3
Parameter
Description
Volts (rms)
AC output Vrms setting
Volts (DC)
DC output setting
Freq (Hz)
Output frequency setting
Sync source
Select Phase or Immed (immediate)
Phase Ctrl
Set ‘Master’ or ‘Slave’ for 3-phase operation
Phase (deg)
Phase angle setting
Table 1 – Display 1 of 3 Settings
Display 2 of 3
This display shows all 12 power measurements and an output timer.