Datasheet

Programmable AC Power Source
9830B Series
5
www.bkprecision.com
Phase settings
Three and multi-phase operation
Set voltage, frequency, and phase directly from the front panel on each
AC source.
Up to 300 Vrms
Individual phase
control from 0º to 360º
DC oset
45 Hz to 600 Hz
frequency range
3-Phase kit option
The 3-phase kit (TL983P-KIT) includes three adapters and two standard
pin to pin RJ45 cables.
Phase synchronization
The TL983P adapters connect
to the Digital I/O connector on the
rear of the AC source. Standard
RJ45 communication cables connect
each adapter to route the 3-phase
synchronization signal from the
master to the slave units.
Three-phase mode
Control voltage and frequency of the three-phase system remotely
using the application software. Phase values are fixed at 0º, 120º,
and 240º. The output monitor window displays live voltage,
current, and power measurements for each connected AC source.
Multi-phase mode
Multi-phase mode allows for direct control of individual AC source
parameters including voltage and phase.
Application software
Application software offers convenient control, monitoring, and data logging capabilities. This software supports three-phase mode or multi-phase mode for
different applications.
Master
Slave1
Slave2
The 8-pin digital I/O terminal block
preserves commonly used signaling
pins including remote inhibit,
AC on, and fault out capabilities
while in 3-phase operation.