User Manual
82
Save Output Settings
Follow these steps to save settings:
1. Press , then to enter MEMORY SETTING. The
following screen will be displayed:
For Dual Channel models:
2. Press or or use the keypad to select the memory
location to store settings into. Choose between 0 – 9.
3. Press to set, and use the keypad to enter a value for
voltage. Afterwards, press and enter a value for
current. Press once more and the voltage and current
values will be stored into the selected memory location.
4. The cursor will then automatically move back to select MEM,
and the location number will automatically increment to the
next, except if number 9 (last memory location) was
previously selected.
MEM = 0
V = 0.000 V I = 0.000 A
MEM = 0
CH1 V = 0.000 V I = 0.000 A
CH2 V = 0.000 V I = 0.000 A
Menu
4
Enter
Enter
Enter