User Manual

LIMIT MAX and VOLT LIMIT MIN settings if you are

unable to set a voltage within the specifications of the

power supply.

Slew Rate Configuration

Voltage and current slew rate of the output can be configured by

doing the following:

1. Press , then to enter OUTPUT SETTING. Press

to select VOLT SLEWRATE SETTING. The following will be

displayed:

For Dual Channel models:

2. Use the keypad to enter the voltage slew rate. (Refer to

Table 4) Then press the save the changes.

V SLEWRATE = _ 7.000 V / ms

CH1 V SLEWRATE = _ 7.000 V / ms

CH2 V SLEWRATE = _ 7.000 V / ms

Enter