User Manual

3 Front Panel Operation

3.1 Menu Options

All settings and parameters can be configured from the built-in menu

system of the power supply. To access the menu, press .

The menu system is divided into 8 categories and organized as

follows:

1. SYSTEM SETTING

 REMOTE(USB,ETHERNET,GPIB,RS232 (optional))

 GPIB ADDR(1-30)

 KEY LOCK(ON,OFF)

 IP CONFIG(STATIC)

 IP ADDRESS(xxx.xxx.xxx.xxx, where x = 0-9)

 BEEP(ON,OFF)

 LCD BACKLIT(ALWAYS ON, 1,5,10,30 MINS OFF)

 RECALL DEFAULT(NO,YES)

 POWER ON STATE (OFF,LAST)

 OUTPUT MODE (MULTI,SINGLE)*

 TRACKING MODE (ON,OFF)*

 EXTERN CONTROL (VOLT,RES,OFF) (optional)

 EXTERN LEVEL (5V,10V) (optional)

 EXTERN TRIG (ON,OFF) (optional)

2. OUTPUT SETTING

1. VOLT LIMIT SETTING

 VOLT LIMIT MAX (0 – Max. Voltage)

 VOLT LIMIT MIN (0 – Max. Voltage)

2. CURR LIMIT SETTING

 CURR LIMIT MAX (0 – Max. Current)

 CURR LIMIT MIN (0 – Max. Current)

3. VOLT SLEWRATE SETTING

 V SLEWRATE

4. CURR SLEWRATE SETTING

 I SLEWRATE

5. MEASURE AVERAGE(1-10)

6. LED MODE SETTING

 LED MODE (ON,OFF)