User Manual

23
Selected channel indicators
1.7 Installing Optional Interface Cards
Five optional interface cards are available and can be installed in
either the S1 or S2 slots. They are:
Option 1: GPIB/LAN Card
Adds GPIB and LAN interface
Option2: DIO/Analog Card (Single channel)
Adds digital I/O and External Analog Control
Option 3: DIO/Analog Card (Dual channel)
Adds dual channel digital I/O and External Analog Control
Option 4: RS485 Card
Adds RS-485 interface for multi power supply control
Option 5: RS232 Card
Adds RS-232 interface
How to Install Interface Cards
1. Power off the instrument and disconnect the AC power cord
in the rear panel. Remove the back faceplate covering the
S1 or S2 slot in the rear panel by removing the two screws
on each side.
4