User Manual

174

7 Calibration

Access Calibration Menu

Follow the steps below to access the calibration menu.

1. Press , then to enter CALIBRATION. The

following screen will be displayed:

2. Enter the password: 13579 with the numeric keypad.

3. There will be two options. 1. CURRENT CALIBRATION, and

2. VOLTAGE CALIBRATION, as shown in the screen below.

A third option 3. EXT. INPUT CALIB is available if the supply

has an optional DIO/Analog Interface Card installed.

Requirements

Before calibrating, the “+”output terminal must be connected to the

“+S” terminal and the “–”output terminal must be connected to the

“–S” terminal using the included shorting bars/pins.

PLEASE KEYIN PASSWORD : _

1. CURRENT CALIBRATION

2. VOLTAGE CALIBRATION