User Manual

163
Description:
Configures/Queries the over voltage protection value
of all the power supplies connected in the chain. See
OVSET/OVSET2 command for similar syntax. GOV2
is for dual channel models only.
Example:
GOV 70.000
Sets all the power supplies’ OVP value to 70.000V.
GOVP/GOVP2
Description:
Configures/Queries the over voltage protection state
of all the power supplies connected in the chain. See
OVP/OVP2 command for similar syntax. GOVP2 is
for dual channel models only.
Example:
GOVP ON
Sets all the power supplies’ OVP state to ON.
GOC/GOC2
Description:
Configures/Queries the over current protection value
of all the power supplies connected in the chain. See
OISET/OISET2 command for similar syntax. GOC2
is for dual channel models only.
Example:
GOC 3.000
Sets all the power supplies’ OCP value to 3.000 A.
GOCP/GOCP2
Description:
Configures/Queries the over current protection state
of all the power supplies connected in the chain. See
OCP/OCP2 command for similar syntax. GOCP2 is
for dual channel models only.
Example:
GOCP ON
Sets all the power supplies’ OCP state to ON.
Error List
Using any of the commands for multi unit programming for