User Manual

162
GPV/GPV2
Description:
Configures/Queries the VSET voltage setting of all
the power supplies connected in the chain. See
VOLTage/VOLT2 command for similar syntax. GPV2
is for dual channel models only.
Example:
GPV 15.698
Sets all the power supplies’ VSET voltage setting to
15.698 V.
GPC/GPC2
Description:
Configures/Queries the ISET current setting of all the
power supplies connected in the chain. See
CURRent/CURR2 command for similar syntax.
GPC2 is for dual channel models only.
Example:
GPC 3.123
Sets all the power supplies’ ISET current setting to
3.123 A.
GOUT/GOUT2
Description:
Configures/Queries the output state of all the power
supplies in the chain. See OUT/OUT2 command for
similar syntax. GOUT2 is for dual channel models
only.
Example:
GOUT ON
Sets all the power supplies’ output to ON.
GOUTA
Note:
For dual channel models only.
Description:
Configures the output state of both channels of the
selected power supply.
Example:
GOUTA ON
Enables both channel outputs of all the dual channel
power supplies in the chain.
GOV/GOV2