User Manual

119
Syntax:
OUTput:MIN:CURR2<SP><current>
OUTput:MIN:CURR2?
<current> - Current value. Less than max. current
limit value are valid.
Example:
OUT:MIN:CURR2 0
Sets the current minimum limit to 0 A.
Query:
OUT:MIN:CURR2?
Return String:
0
Format:
<NRf>
OUTput:SR:VOLTage
Description:
Configures/Queries the voltage slew rate in unit of
V/ms. For dual channel models, this will configure the
slew rate for channel 1.
Syntax:
OUTput:SR:VOLTage<SP><voltage>
OUTput:SR:VOLTage?
<voltage> - Voltage value. 0 – max. voltage slew
rate value. See “Slew Rate Configuration” in section
3.5.
Example:
OUT:SR:VOLT 7.000
Sets the voltage slew rate to 7.000 V/ms
Query:
OUT:SR:VOLT?
Return String:
7.000
Format:
<NRf>
OUTput:SR:VOLT2
Note:
For dual channel models only.
Description:
Configures/Queries the voltage slew rate for channel
2.
Syntax:
OUTput:SR:VOLT2<SP><voltage>
OUTput:SR:VOLT2?
<voltage> - Voltage value. 0 – max. voltage slew
rate value. See “Slew Rate Configuration” in section
3.5.
Example:
OUT:SR:VOLT2 7.000
Sets the voltage slew rate to 7.000 V/ms
Query:
OUT:SR:VOLT2?
Return String:
7.000
Format:
<NRf>