User Manual

123
selected programmed sequence.
Syntax:
PROGram:REPeat<SP><number>
PROGram:REPeat?
<number> - 1 – 50000 (max.)
Example:
PROG:REP 10
Runs the set of sequences in the selected program
location 10 times.
Query:
PROG:REP?
Return String:
300
Currently set to repeat the sequence 300 times.
Format:
<NR1>
PROGram:RUN
Description:
Configure/Query the state of the program.
Syntax:
PROGram:RUN<SP><Boolean>
PROG:RUN?
Example:
PROG 1
PROG ON
Enables the programmed sequence to start.
Query:
PROG:RUN?
Return String:
OFF
Currently the selected program sequence is not
running.
Format:
ON or OFF
PROGram:SAV
Description:
Saves the programmed sequence into the selected
memory location (Select using the PROG command)
Syntax:
PROGram:SAV
Example:
PROG:SAV
PROGram:STEP
Description:
Configures/Queries the step number in the sequence
to setup.
Syntax:
PROGram:STEP<SP><number>
PROGram:STEP?
<number> - 1 – 150 (max.)
Example:
PROG:STEP 10
Selects step number 10 for setup.