User Manual

Controlling Voltage/Current Output with Keys

When the output is ON (enabled), the voltage (CV mode) or current

(CC mode) output can be controlled incrementally by key presses.

To do this, press or and a cursor will appear, highlighting the

last digit of the measured voltage or current display. Use or

to change and select the digit you want to change, and press

or to increase or decrease that digit. The output voltage or

current will change immediately as you change the digits. Press

at any time or allow the supply to idle for 10 seconds (without any

key presses) to go back to the normal display.

For Dual Channel models:

Note: The voltage setting range is dependent on the unit’s

maximum voltage output specification as well as the

voltage limits set from the system menu. Verify VOLT

5 . 000 V1 . 000 A

CH1CV

5 . 000 V1 . 000 A

CH2CV5 . 000 V1 . 000 A

Enter