User Manual

66
9185B
0.001 – 15.00
0.001 – 0.0125
Output Timer Function
The power supply has a built-in output timer function that can be
enabled to allow setting a time in which output is remained ON.
Follow the steps below to setup this function:
1. Press , then to select TIMER FUNCTION. The
following screen will be displayed:
2. While the cursor is selecting TIMER, press so that ON is
selected, then press to set and select TIME. This will
be the time for which the output will remain ON.
3. Use the numeric keypad to enter the Hr (hour) for the output
to remain ON. Press to select Min (minute). Enter a
value and press again to select Sec (second).
4. The acceptable ranges are:
Hr: 0 999, Min: 0 59, Sec: 0 59
5. Press once to return to previous menu items, or press
three times to exit the menu when finished.
6. Upon returning to the main display, it will show the following:
TIMER = OFF
TIME = 0 Hr 0 Min 0 Sec
Menu
6
Enter
Enter
Enter
Esc