User Manual

Measurement Average Setting

The averaging measurements used to display a reading can be

adjusted by following the steps below:

1. Press , then to enter OUTPUT SETTING. Press

to select MEASURE AVERAGE. The following will display:

2. Use the numeric keypad to enter the number of

measurements the instrument will average out prior to

displaying the value. Valid numbers are from 1 to 10.

3. Press to save changes, then press three times

to exit the menu.

3.6 Dual Channel Configurations

Features described in this section pertain to dual channel models

9173B and 9174B only. They are not available for all other models.

Multi/Single Output Control

Dual channel outputs can be configured so that pressing the output

buttons can turn ON (enable) or OFF (disable) both channels’

outputs simultaneously.

AVERAGE TIME = _ 2

Enter

Esc