User Manual

9185B

0.001 – 15.00

0.001 – 0.0125

Output Timer Function

The power supply has a built-in output timer function that can be

enabled to allow setting a time in which output is remained ON.

Follow the steps below to setup this function:

1. Press , then to select TIMER FUNCTION. The

following screen will be displayed:

2. While the cursor is selecting TIMER, press so that ON is

selected, then press to set and select TIME. This will

be the time for which the output will remain ON.

3. Use the numeric keypad to enter the Hr (hour) for the output

to remain ON. Press to select Min (minute). Enter a

value and press again to select Sec (second).

4. The acceptable ranges are:

Hr: 0 – 999, Min: 0 – 59, Sec: 0 – 59

5. Press once to return to previous menu items, or press

three times to exit the menu when finished.

6. Upon returning to the main display, it will show the following:

TIMER = OFF

TIME = 0 Hr 0 Min 0 Sec

Enter

Esc