User Manual

44
the and keys to select the setting you want to
change. Below is an example of the Remote settings being
selected. Note the underline below the first character of the
setting “USB”.
5. Settings have selectable options that are not numeric (i.e.
REMOTE settings shown above). To change them, press
or . To save the changes, press the key.
6. Parameters have numerical set values (i.e. GPIB ADDR
parameter shown above). To change them, use the numeric
keypad to enter the value you want to change to. To save
the changes, press the key.
Note: Changes to settings and parameters apply only when the
key is pressed to confirm the changes. Otherwise, they will
default to previous set option or value.
REMOTE = USB
GPIB ADDR = 1
KEY LOCK = OFF
Enter
Enter
Enter