User Manual

For Dual Channel models:

2. Press to select ON. Press to confirm the changes,

and use the numeric keypad to set the current limit for the

protection to trip. Press again to save changes. When

the power supply current output reaches this limit, the OCP

will trip.

3. Press twice to exit the menu. To disable it, select

OFF.

3.10 Save/Recall Output Settings

The power supply has internal memory to store up to 10 settings,

and each setting includes the set voltage (VSET) and set current

(ISET) values.

CH1 OCP = ON SET = 10.000 A

CH2 OCP = OFF SET = 10.000 A

Enter

Esc

Enter