User Manual

3.5 Configure Voltage and Current Output

Voltage and Current Limit Settings

The power supply has software voltage and current limit protection

settings that can be configured to limit the settable range for output

from front panel or remote operation. Follow the steps in this section

to adjust these settings.

Voltage Limit Set

1. Press , then to enter OUTPUT SETTING. Press

to select VOLT LIMIT SETTING.

2. VOLT LIMIT MAX should be selected. Use the keypad to

enter the maximum voltage set limit and press to save

changes. The maximum voltage that can be set depends on

the power supply’s maximum output voltage.

3. VOLT LIMIT MIN is now selected. Again, use the keypad to

enter the minimum voltage set limit and press to save

changes.

4. Press once to return to previous menu items, or press

three times to exit the menu when finished.

Dual Channel Models

For models with dual channels, the display will look different, with

CH1 and CH2 indicators on the left side of the display to indicate

their respective VOLT LIMIT MAX/MIN parameters.

Enter

Esc