User Manual

133
1
Command Error
2
Execution Error
3
Query Error
4
Input Range Error
SYStem:EXTernal
Description:
Configure/Query the state/type of the analog external
control.
Syntax:
SYStem:EXTernal<SP><type>
SYStem:EXTernal?
<type> - 0/OFF, 1/VOLT, 2/RES
Example:
SYS:EXT 1
SYS:EXT VOLT
Set to use voltage source for external analog control
Query:
SYS:EXT?
Return String:
2
Currently set to resistance external control.
Format:
<type>
SYStem:EXTernal:LEVel
Description:
Configure/Query voltage scale to use for external
voltage control.
Syntax:
SYStem:EXTernal:LEVel<SP><scale>
SYStem:EXTernal:LEVel?
<scale> - 0/V10 or 1/V5
Example:
SYS:EXT:LEV V10
SYS:EXT:LEV 0
Selects 0-10 V scale to use for external voltage
control.
Query:
SYS:EXT?
Return String:
0
0-10 V scale is selected.
Format:
<scale>
SYStem:GPIB:ADDRess
Description:
Configure/Query the GPIB address.
Syntax:
SYStem:GPIB:ADDRess<SP><address>
SYStem:GPIB:ADDRess?
<address> - 1 – 30 are valid numbers.