User Manual

24
Save/Recall Instrument Settings
The instrument can save up to 100 instrument settings in non-volatile memory. Memory is
allocated in 10 different storage groups (group 0 to 9), and each group has 10 memory locations
to store settings (0 to 9). The memory group must be selected from the menu first, before
settings can be saved within the group.
Select Storage Group
1. From the SYSTEM menu, browse and select Memory and press . The following
screen will appear.
2. Use the current adjust knob or the numeric keypad to enter the storage group. Select
between 0 – 9. Press to save selection.
3. To exit the menu at any time, press twice.
Save Settings
1. Set up all the instrument settings that you want to save.
2. Then, press and . The display will show the following:
3. Use the current adjust knob or the numeric keypad to enter the memory location in
which to store current instrument settings. Select between 0 – 9. Press to save
to the selection location.
4. If it saved successfully, there will be a message on display: Save Success!
80.000V
12.000A
Save Data to Bank : 0
OFF
MEMORY
Group = 0