User Manual

22
To clear the trip status, press once.
3.3 SYSTEM Menu
All setup procedures and settings explained in this section can be accessed from the SYSTEM
menu. To access this menu, press and press . When SYSTEM is blinking, press
.
Restore Factory Default Settings
All instrument settings can be reset back to their factory default values by doing the following:
Restoring the instrument to factory default will change all current instrument
settings and parameters back to their default values.
1. From the SYSTEM menu, select Initialize and press .
2. The instrument will return to the normal display and all settings are now restored back
to factory default. The below table lists some of the factory default settings.
Table 3.1 - Factory Default Settings
Communication Address
0
Key Sound
ON
Trigger Mode
Manual
Communication Interface
RS232
RS232 Settings
4800, 8, N, 1
Return Meter
Off
Memory
Group 0
80.000VOPP
12.000A
0.0W
OFF Prot