User Manual

16!
!
A
A
V
Cursor Position and Step Size
!
Cursor position
Voltage step size
Current step size
A
!
1A
B
1V
0.1A
C
0.1V
0.01A
D
0.01V
0.001A
!
Check the Set Voltage and Set Current Value
The power supply usually displays the actual voltage and current value. Press
!
!
Shift
twice to check the set value for voltage and current. The display will blink for 3
seconds while displaying the set values.
Key Lock Function
This function locks the keyboard to prevent unintended modification of power
supply settings. Press
!
Shift
(Shift LED will be lit), followed by the
C
(Lock)
key. Now the keys and the knob are locked and the Lock LED is lit. Press the
Shift key followed by the Lock key again to disable the Lock function.
!
OVP Function
!
Press
!
Shift
!
then press and hold the
9110
100W Multi Range 60V/5A DC Power Supply
!
CV CC
!
D V/A
(Setup) key for 3 seconds.
!
!
OVP OCP
Afterwards the LCD will display OVP
and you can adjust the OVP value using
!
!
A
B
C
D
V
Lock
Preset
the cursor keys
A
B
knob.
and the
!
!
OFF
Shift
!
OCP Function
After the OVP value is set, press
C
to
!
!
OVP Value
enter OCP mode. Use the cursor keys
!
9110
A B
!
OCP value.
!
Note
and the knob to set the
100W Multi Range 60V/5A DC Power Supply
!
!
!
!
!
A
B
C
D
CV CC
!
!
OVP OCP
!
!
Lock
Preset
The output of the power supply will
automatically turn off if the OVP and
OCP value are less than the actual
voltage and current value.
!
!
!
!
!
!
OCP Value
!
!
!!!!!!!!!!
OFF
Shift!