User Manual

77
Default Settings and System Reset
In the <System Setup> menu, the softkeys to the right of the screen allow the customer to set
the unit to Default Settings or perform a System Reset.
 Press the Default Settings soft button to set all the settings of the System Setup menu
to their factory default values.
 Press the System Reset soft button to reset the instrument.
File Management
The LCR meters have built-in non-volatile memory for storing and recalling instrument settings.
Most measurement menus, (i.e. Meas Display, List Sweep, etc.) have the File Manage option at
the bottom of the soft keys menu. To go to the page that has the File Manage option, press the
white down arrow soft key. Press FILE MANAGE soft key to enter into the LCR FILES LIST
(Internal memory) as shown below:
Figure 28 - File Management