User Manual

33
Setting Decimal Resolution
1) Move the cursor to MEASUREMENT DISPLAY FIELD (Figure 6) to either the primary
measurement or secondary measurement and the following soft keys will be displayed:
 Decimal Point Auto (D.P. Auto)
 Decimal Point Hold (D.P. Fix)
 Decimal Point Position Increment (D.P. POS INCR +)
 Decimal Point Position Decrement (D.P. POS DECL -)
2) Press DECIMAL AUTO to reset the decimal position of the primary or the secondary
parameter test result to its default setting.
3) Press DECIMAL HOLD to lock the decimal location of the primary or the secondary
parameter test result.
4) Press DECIMAL LOCATION + to increase the displayed digit by ten times.
5) Press DECIMAL LOCATION - to decrease the displayed digit by ten times.
NOTE: Under the following circumstances, the decimal lock function will be disabled automatically and return
to auto:
 Changing the test function.
 Changing the deviation test mode (ΔABS, Δ%, OFF) in deviation test mode.
Zoom
The 894/895 LCR meters let the user enlarge the display size of the measurement results.
 Press once the Zoom button to enlarge the measurement results display and press it
once more to return normal view. Refer to Figure 2 for more information.