User Manual

28
be displayed.
 Y-d
 Y-r
 ←
Press the soft key to select the secondary parameter. Then press ← to return to the
previous menu.
9) Press R—…→ to select R as the primary parameter, the following parameters will be
displayed.
 R-X
 Rp-Q
 Rs-Q
 ←
Press the soft key to select the secondary parameter. Then press ← to return to the
previous menu.
10) Press ↓, the following parameters will be shown.
 G-B
 DCR
 L2A—…→
 L2B —…→
 ↑
11) Press G-B to select G as the primary parameter and B as the secondary parameter.
12) Press DCR to select DC resistance as the measurement parameter.
13) Press L2A-…→, the following parameters will be displayed:
 L2A-N
 L2A-1/N
 L2A-M
 L2A-R2
 ←
Press the soft key corresponding to the required parameter. Then press ← to return to the
previous menu.
14) Press L2B-…→. The following parameters will be displayed:
 L2B-N
 L2A-1/N
 L2B-M
 L2B-R2
 ←