User Manual

26
R
X
Rp-X
Rp-Q
G-B
N/A
DCR
N/A
L2A*
N
1/N
M
R2
L2B*
N
1/N
M
R2
Table 5 – Additional Primary Parameter Combinations
*Used with transformer test fixture TL89T1.
Selecting Primary and Secondary Parameters
1) Move the cursor to select FUNC field , and the following soft keys will be displayed on
the screen.
 Cp—…→
 Cs—…→
 Lp—…→
 Ls—…→
 ↓
2) Press the soft key corresponding to Cp—…→ to select Cp as the primary parameter,
and the following parameters will be displayed:
 Cp-D
 Cp-Q
 Cp-G
 Cp-Rp
 ←
Press the soft key to select the secondary parameter. Then press ← to return to the
previous menu.
3) Press Cs—…→ to select Cs as the primary parameter, and the following parameters
will be displayed:
 Cs-D