User Manual

ManualsBrandsB&K Precision ManualsComponent Testing InstrumentsLCR Meter, Bench, 100MOhm, 10kH, 0.1F

71

LSD/8 | LSR/9 |

LPQ/10 | LPD/11

| LPR/12 |

LPG/13 | ZTH/14

| YTH/15 |

RX/16 | GB/17 |

DCR/18 | ? >

:RANGe < HOLD/0 | AUTO/1

| ?>

RESUlt?

:SPEEd <SLOW/1 |

FAST/2| ?>

Set or return the measurement range

control

Return the measured (raw data) primary

<NRf> and secondary <NRf> reading

Set or return the measurement speed

RECall

:CONFiguration <NR1>

Recall subsystem

Recall configuration parameters from

internal memory (CFG00.CFG-CFG09.CFG)

or external USB flash disk (CFG10.CFG-

CFG99.CFG)

SWEEp

:BUSY?

:POInt <NR1 | ?>

:DATA?

:DATA: ALL?

:MODE <LINear/0 |

LOGarithm/1 | ?>

:DISPlay

Sweep subsystem

Queries the status of sweep.

Set or return the sweep point n to be

returned the result of SWEEp:DATA?

command

Return sweep test results of the frequency

<NRf> and data <NRf> of point n

Return sweep test results (300 points)

(This command is not supported via GPIB

and LAN interface due to buffer size limit.)

Set or return the sweep mode