User Manual

70
:DATA?
:LIMit
:BIN[1-9] <NRf, NRf | ?>
:SECondary <NRf, NRf ?>
:NOMinal <NRf | ?>
:TRIGger
Return the bin counts of bin 1<NR1>, bin 2
<NR1>, …, bin 9 <NR1>, out of specification
bin <NR1> and secondary bin <NR1>
Set or return the limit value of the bin[1-9],
<NRf, NRf> = <low, high>
Set or return the limit value of secondary
bin <NRf, NRf> = <low, high>
Set or return the nominal value of tolerance
mode
Trigger a measurement of bin count
DISPlay
:FONT <NORMal/0 | LARGe/1
| ?>
:MODE <DECimal/0 |
SCIentific/1 | ?>
:PAGE < BIN/0 |
MEASurement/1 |
SWEEp/2 |
SYSTem/3 | ?>
:PRImary:DIGit <NR1 | ?>
:SECondary:DIGit <NR1 | ?>
Display subsystem
Set or return display font
Set or return display mode
Select or return measurement function
page
Set or return primary digits
Set or return secondary digits
FETCh?
Return the fetched (display) primary <NRf>
and secondary <NRf> reading
FORMat
[:DATA] <ASCii/0 | REAL/1
| ?>
Format subsystem
Select or return the data format to be ASCII
code or binary code
FREQuency <NRf | ?>
Set or return test signal frequency
LEVel
:AC <NRf | ?>
Level subsystem
Set or return test signal level (0.5 or 1)
MEASurement
:FUNCtion < CSQ/0 | CSD/1 |
CSR/2 | CPQ/3 |
CPD/4 | CPR/5 |
CPG/6 | LSQ/7 |
Measurement subsystem
Set or return the measurement function