User Manual

68
:OPEN
:SHORt
Execute open calibration
Execute short calibration
BIN
:ABSolute
:COMParator
:BIN[1-9] <BOOL | ?>
:SECondary <BOOL | ?>
:COUNt
:CLEar
:DATA?
:LIMit
:BIN[1-9] <NRf, NRf | ?>
:SECondary <NRf, NRf
| ?>
:BEEPer <OFF/0 | PASS/1 |
FAIL/2 | ?>
:DISPlay
:MODE <BIN/0 | TABle/1 |
HISTogram/2 | ?>
:BIN <CSQ/0 | CSD/1 |
CSR/2 | CPQ/3 |
CPD/4 | CPR/5 |
CPG/6 | LSQ/7 |
LSD/8 | LSR/9 |
LPQ/10 | LPD/11 |
LPR/12 | LPG/13 |
ZTH/14 | YTH/15 |
RX/16 | GB/17 |
DCR/18 | ?>
BIN subsystem
Absolute mode
Set or return the bin[1-9] comparator on or
off switch
Set or return the secondary bin comparator
on or off
Clear bin counts
Return the bin counts of bin 1<NR1>, bin 2
<NR1>, …, bin 9 <NR1>, out of specification
bin <NR1> and secondary bin <NR1>
Set or return the limit value of the bin[1-9],
<NRf, NRf> = <low, high>
Set or return the limit value of secondary
bin <NRf, NRf> = <low, high>
Set or return the beeper in bin test
Set or return display mode of bin test
Set or return function in BIN display mode