User Manual

67
6.4 SCPI Common Commands
The instrument is compatible with most of the common IEEE-488.2 and SCPI
commands. Common commands generally control overall LCR meter
functions, such as reset, status, and synchronization. All common commands
consist of a three-letter mnemonic preceded by an asterisk (*). Commands
ended with question mark (?) represent a query command.
The following table lists the common SCPI commands supported:
Table 6.3 – SCPI Common Commands List
Command
Description
*CLS
Clear status
*IDN?
Return the instrument identification (<Manufacturer>,
<model>, <serial number>, <firmware type and version>)
*RCL <NR1>
Recall setting from memory
*RST
Reset
*SAV <NR1>
Save setting to memory
6.5 SCPI Command Subsystem
Subsystem commands are specific to functions. They can be a single
command or a group of commands. The groups are comprised of commands
that extend one or more levels below the root. The subsystem commands are
arranged alphabetically according to the function they perform.
The following table lists the common SCPI subsystem commands supported:
Table 6.4 – SCPI Command Subsystem
Command
Description
CALibrate
:BUSY?
Calibrate subsystem
Return calibration status <NR1>, 0=done,
1=busy, -1=fail