User Manual

57
To save the test result, first, make the measurement of desired test such as
single measurement, bin, or sweep. Press the key and press the SAVE
MEAS softkey option to show the save measurement pop-up window. The file
name of the measurement result is 891RLTxxx.TXT, where xxx represents 000
to 999 locations in the external USB flash drive.
Figure 5.10 – Save Measurement Pop-Up Window
Use the numeric keypad to edit the desired location from 000 to 999 in the
memory. Press the SAVE softkey option to execute the save function or press
ABORT to close the save configuration pop-up window. If saved successfully,
the “891RLTxxx.TXT File Saved !” message will be displayed on the screen.
Save a Screenshot
The contents on the LCD screen can be captured using the screenshot
function. It will create a bitmap file of the entire 480 x 272 pixels of screen.
The file name of the LCD screen is 891SCRxxx.BMP, where xxx represents the
000 to 999 locations in the external USB flash drive. To make a screenshot of
the LCD screen, press the key and press the SAVE SCREEN softkey
option to show the save screen pop-up window, as shown below.