User Manual

53
Figure 5.3 – Save Configuration Pop-Up Window
Use the numeric keypad to edit the desired location from 00 to 99 in the
memory, from 00 to 09, Press SAVE softkey option to execute the save
function or press ABORT to close the save configuration pop-up window. The
“891CFGxx.CFG File Saved !” message will be displayed on the screen, if saved
successfully, a message will pop up as shown below.
Figure 5.4 – Save Confirmation Message
Recall a Measurement Configuration
To recall the measurement configuration, press the key first and then
press the RECALL CONFIG softkey to show the save configuration pop-up
Indicates
internal
memory or
external USB
flash drive
Filename to
be saved