User Manual

49
Subnet Mask
Set the instrument Subnet Mask
Numeric Keys
Gateway
Set the instrument Gateway
Numeric Keys
Figure 4.5 – Communication Setup Screen
For further information on the communication setup, see Interface
Configuration section.
5 Save/Recall
The 891 has built-in non-volatile memory that can store 10 sets of
measurement configurations. With an external USB flash drive, users can
store an additional 90 sets of measurement configurations and up to 1000
sets each of measurement data results and screen captures. Before
Save/Recall is executed, insert the USB flash drive into the front USB flash
drive port. A short message indicates the USB flash drive has been attached
and recognized, as shown below.
Note: The USB flash drive is compatible with most FAT32 formatted flash
drives.