User Manual

37
Using the PG UP or PG DN softkey options will scroll the table up or down. Up
to 300 points (depending on sweep settings) can be displayed in table display.
If interpolation is turned on, interpolated data will be shown in orange. The
result table can be accessed using the DISP function key.
Figure 3.29 – Sweep Table Display (with INTERP ON)
NOTE: You may save the table sweep results to an external USB flash drive. To
do so, please refer to the Save a Measurement Result section.
Configure Sweep Function
Figure 3.30 - Sweep Function
Measurement
Parameters
Sweep
Graph