User Manual

24
VRMS, 1 VDC*
RANGE
Specify the measurement range control
AUTO, HOLD
SPEED
Specify the measurement speed
SLOW, FAST
*DCR mode only
Measurement Display
The number of digits of the primary and secondary measurement value can
be changed from 2 to 4 digits. Also, the display notation of decimal or
scientific can be selected as well. The large display enhances the readability
of the measurement. The following table shows display options for the
measurement function.
Table 3.6 – Measurement Display Options
Parameter
Description
Input
NOTATION
Specify the numerical notation
Decimal, Scientific
PRI. DIG.
Specify the number of digits to display
for primary measurement
2, 3, 4
SEC. DIG.
Specify the number of digits to display
for the secondary measurement
2, 3, 4
DISP
(NORM)
When selected, all measurement
parameters will be displayed on screen
DISP
(LARGE)
When selected, only the primary and
secondary measurements will be displayed
in a larger font.
The following steps walk through how to configure the measurement display
options:
1. Press the DISP function key to open the display softkey options.