Datasheet

www.bkprecision.com
Bench LCR Meter
Model 891
3
Flexible operation
Remote PC control
Integrate your LCR meter into an automated test
system and control it from a PC using SCPI
commands via the standard USB, GPIB, or LAN
interface.
Display options
Users have the option to display up to 4 digits
resolution on primary and secondary
measurements in decimal or scientific notation.
Large display mode is also availa
ble for easy
viewing
from a distance.
Configure and control basic instrument settings
and take measurements from a remote computer
using a web browser. The 891 can also be
controlled with SCPI commands using a socket
or Telnet connection via the LAN interface.
Built-in web server and LAN interface
Quickly sort components with the instrument’s
9 primary BINs, 1 secondary BIN, and 1
out-of-spec BIN. The results can be displayed
on a table or histogram and saved to a USB flash
drive. High and low limits for each bin can be set
up in absolute or tolerance mode with Pass/Fail
beep.
Bin comparator sorting function
Histogram display, Table display, and Bin display
Large display mode
Linear sweep function, Logarithmic sweep function, and Linear & Logarithmic sweep function table
Characterize components up to 300 kHz using a
300-point linear or logarithmic sweep. Measured
values for each frequency point can be read
directly on the display. Sweep results can be
displayed on a graph or table and then saved to
a USB fla
sh drive or read out through the remote
interface.
Linear
and logarithmic sweep function
Communication setupBuilt-in web server interface